BC-200 / BC-200T
Firmware Release Notes
Version 0.48 | Released 9-21-17
MB CPU: V0.48
MCTL CPU: V1.00
- Bug Fix: Cannot reply the VISCA status command in sleep mode
- Bug Fix: Cannot be powered on by DVIP in sleep mode
- Bug Fix: Some boards display bad OSD
- Bug Fix: Not easy to switch to 4K mode correctly
- Bug Fix: Cannot switch to 720p50 mode by RS422 control
- Bug Fix: WB mode can be stored & recalled
- Bug Fix: WB mode is 5600K after reset all
- Change: Set the default WB mode=5600K
- Change: Changed the OSD’s "1080i60" option to "1080i59.94"
- Change: Set the digital zoom MAX = 4x (zoom position=7000h)
- Change: Set the default of AE compensation to 6 to avoid over exposure in the AGC ON mode
- Change: Change the VISCA Command Model No. = 0202 for easier identification by RMC180 controller
- Change: VISCA command status reply: Except for AWB/ATW or MWB, all other modes should reply mode = 3 to facilitate LED indicator lighting on the RMC-180
- Change: The VISCA ID reply time via the RS-422 interface is designed for camera cascade application so that interference between cameras does not occur
Version 0.27 | Released 5-15-17
MB CPU: V0.27
