Fixing SE-700 & SE-1200 Missing Menu Settings

This applies to the SE-700, SEB-1200 (SE-1200MU + RMC-260), HS-1200
Firmware versions 1.2.2.8 and later

If you experience that your switcher's menu is missing keyer settings, among other features, double check in the setup menu that the menu mode is set to Advanced instead of Basic.

SETUP MENU MODE BASIC / ADVANCED

ADDITIONAL

SE-1200MU & HS-1300

How to do Chromakey and PIP on the SE-1200MU using the RMC-260

HS-1300 Route audio to your Multi-view monitor speakers and headphone jack

To route audio to your multi-view monitor speakers...

Fixing SE-700 & SE-1200 Missing Menu Settings

Fixing SE-700 & SE-1200 Missing Menu Settings ...

RMC-260 Serial Cable Information (For SE-1200MU)

RMC-260 Serial Cable Information(For SE-1200MU) Th...

SE-1200MU RS-232 serial commands, Crestron control and command strings examples

We have had numerous Crestron Integrators ask for ...

SE-1200MU Ethernet Control Protocol Document

Link to the SE-1200MU Ethernet Control Protocol Do...

SE-1200: When I move the T-bar, there is no transition between PVW and PGM. What is wrong?

SE-1200: When I move the T-bar, there is no transi...

Tutorial SE-1200: Configuring IP settings for LAN or direct connection

Tutorial SE-1200: Configuring IP settings for LAN ...

How to save and load still images on the SE-1200MU using the RMC-260

How to save user memory on the SE-1200MU using the RMC-260