LOGO

ITC-100

Intercom System

Intercom System

COMPARE MORE PRODUCTS
Model Number
ITC-100
Tally
2 x 15 Pin DSub Sockets for Tally A and B
MIC / Headset
3.5 mm Stereo Jack Socket for Headphone / Microphone combination
Headset Impedance 8-600 Ohms 100 mW (min)
Headphone
¼” (6.3mm) Stereo Headphone Socket
Headset Impedance 8-600 Ohms 100 mW (min)
Light Socket (DC 12 V)
3 PIN XLR Connector
PIN 2: 12V
PIN 3: GND
Light Power Consumption: 12 V / 100 mA (MAX.)
Microphone
3 PIN XLR / ¼” (6.3mm) Jack Microphone Socket
Switchable Condenser / Dynamic Input
Microphone Level -67 dB
Frequency Response
550-3.6 kHz, <+/- 3dB
THD
< 3%
S/N
> 50dB
Built-in Speaker
70mm x 30mm 32 Ohm 3 Watts
Operating Range
Up to 200 meters between base station and slave
Operating Temp. Range
0~40 °C
Dimension (LxWxH)
482 x 127 x 46 mm
Weight
1.9 kg
Power
DC 12V, 8W
What's in the Box
1 x ITC-100 Base Unit
4 x ITC-100SL Belt Pack
4 x ITC-100SL Carry Case
4 x Cable 5piin XLR to XLR
4 x 3.5mm Jack to 3.5mm Jack Cable
4 x Headset with microphone
4 x Tally LED Indicator
1 x XLR Gooseneck Microphone
1 x XLR Gooseneck Light
1 x 12V 1A Power Supply Unit

PRODUCT SUPPORT

03 Nov 2020 |

ITC-100 Compatibility with ATEM Switchers

ITC-100 Compatibility with ATEM Switchers The ITC-...
Learn more >
03 Nov 2020 |

RP-31 ITC-100 Rear Breakout Panel

Q:  I have an ITC-100 and I would like to purchase...
Learn more >
03 Nov 2020 |

ITC-100 Intercom Cable Wire Gauge and Conductors

ITC-100 Intercom Cable Wire Gauge and Conductors ...
Learn more >
03 Nov 2020 |

ITC-100 Frequently Asked Questions

ITC-100 Frequently Asked Questions Half-Duplex Sys...
Learn more >
03 Nov 2020 |

Audio level of ITC-100 base station

What is the audio level on the 2 wire line of your...
Learn more >
03 Nov 2020 |

Recommended aftermarket headsets for the ITC-100

Does Datavideo recommend specific aftermarket head...
Learn more >