PTC-140

How to control multiple PTC-140 cameras with one IR Remote

How to control multiple PTC-140 cameras with one IR Remote

How to control multiple PTC-140 cameras with one IR Remote

Oct 05 2022 | PTC-140

 

The PTC-140 IR (Infrared) Remote has the ability to control up to 4 cameras.  Normally, every PTC-140 series camera is set by default to "Camera select 1", so if you have multiple cameras it can become confusing to control a specific camera since they are set on the same preset.

 

For Example, if we want to program a second camera to "Camera Select 2" we would do the following:

1. Press and release *

2. Press and release #

3. Press and release F2

See the image below for reference

 

Now, all you need to do is press the camera select button 2 (white button) and you will have control over camera 2.  To select camera 1 again just simply press the camera select button 1 (white button). 

Note: The remote will communicate with each camera until a new camera selection is made.

 

PTC-140IRremote.jpg

相關產品

產品常見問題
相關常見問答
PTC-140

我們能幫到你什麼??

Datavideo support is here to help.